|
|
   |
|
FRONT END LIFT WORK
Once again this will be made pretty and a how to guide constructed when I am done.
Front riser blocks in place 1 2 Tack welding of blocks 1 2 3 4 And full welding of the sub/lift frame 1 2 All painted and ready 3
The next step is to install the sub frames and bolt on the cross members and suspension components that are being painted. The brand new struts/springs/calipers/pads/lines and a few other things will be going in next. I got an entire brake system pads/calipers/slave cyl etc. for around 50 on ebay, no body bid on it as it was in the wrong category. A third subframe will go under the cab area and connect the front and rear subframe, it will also serve as a mounting point for the roll cage and nerf bars.
|
 |
 |
 |
 |
 |
 |
